New Technology for Boating Safety – High Flow Rates
Though simple in design, Fast Flow emergency bilge pump combines versatile capabilities with incomparable power and dependability. With its split impeller & split case design, the pump attaches directly to the propeller shaft, utilizing the power of your engine's drive system. As long as the shaft is turning, your pump is working. Designed to run dry continuously, it serves as a high-volume air blower ventilating heat and fumes from the engine compartment. When until accidental flooding occurs, the pump begins immediately to remove the excess water.
Easy to Install
Available in various sizes to fit most vessels, the Fast Flow emergency bilge pump can be installed without removing the shaft and is available in a hydraulic-operated model which can be mounted independent of the shaft, when accessibility is not available or space is limited. Click Here for Installation Instructions |
When running in dry mode, the Fast Flow pump works as a high-volume blower, ventilating heat and fumes from the engine room. In the event there is a large ingress of water in your vessel, this pump can easily remove everything a standard bilge pump cannot. For example, if there is a 4" hole in a vessel 2 feet below the water line, it will flood in at a rate of approximately 15,960 gallons/hour. This can sink a vessel in a matter of minutes. The smallest Fast Flow pump will pump 24,000 gallons/hour at 2,000 rpm, providing the utmost peace of mind that, should the need arise, our emergency bilge pump could save your boat and save your life.
Simply put, FAST FLOW can move more water out of a sinking boat faster than any other bilge pump made today!
Low Maintenance
Available in sizes to fit most vessels, the Fast Flow emergency bilge pump can be installed without removing the shaft. It has a split impeller and case design and is easy to install. The Fast Flow emergency bilge pump is relatively maintenance free. It contains No mechanical seals, bearings, wear plates, gaskets, gears, belts, valves, filters, switches, rubber impellers, or electrical parts !! The Fast Flow emergency bilge pump is 100% frictionless and maintenance-free. The impeller also acts as a flywheel and should help reduce shaft vibration.
This pump designed to bolt directly to the propeller shaft, eliminating the need for an additional power source. It makes sense to harness the tremendous power of the drive system during an emergency event. The Fast Flow emergency bilge pump is 100% frictionless and maintenance-free. Unlike most pumps, the Fast Flow is designed to run dry continuously and will pump in forward or reverse. The impeller also acts as a flywheel or harmonic balancer and could help reduce shaft vibration problems.
Limited Lifetime Warranty
Fast Flow offers a limited lifetime warranty with a free replacement pump. In addition, some marine insurance companies even offer discounts for vessels with an emergency bilge pump installed.
There is no other pump on the market like the Fast Flow emergency bilge pump.
