Fast Flow 4" Ductile Iron Twin Motor Hydraulic Submersible Pump

Model 4D-SG

For pumping slurry solids

Features

•Very High Flow Rates

•Run Dry Technology

•High Vertical Head Pressure

•Self Priming

•Variable Speed & Flow

•Small Portable Size

•Designed for Severe Service

•Anti-Clog Double suction technology

•No Internal Friction

•No Mechanical Seals

•No Shaft Bearings

The Fast Flow Slurry Gate  is designed to help FF pumps move difficult to pump media where other pumps experience mechanical seal failure. The addition of a slurry gate allows the pump to mix solid/liquid mixtures into slurries for easier pumping. Two efficient self-lubricated hydraulic gear motors power the pump and are specifically engineered to keep contaminants out. Fast Flow pumps have absolutely no wear plates, mechanical seals, and impeller to housing contact.

One Pump - Two Functions!

Mix Mode

•Use Mix Mode when there is fluid in the tank and the solids are on the bottom.

•The recirculation effect puts the solids into the suspension making pumping easier.

Pump Mode

•Use Pump Mode when the slurry is mixed in the tank and ready to be pumped.

•Simply actuate the slurry gate to switch from the mix mode to pump mode.

Pump Specs

Weight ...................................................................... 157 lb (71g)

Max Water Flow ....................................................... 1200GPM (272m³/hr)

Max Vertical Head .................................................... 230 Feet (70m)

Operating PSI ........................................................... 2250-3000 PSI 

Hydraulic Flow ......................................................... 4 to 30 GPM 

Power Source .......................................................... Hydraulic Driven

Material .................................................................... Hardened Ductile

Discharge ................................................................ 4" Male Cam Lock

Dimensions ............................................................. 36"x16"x22"

Hydraulic Oil ........................................................... AW-32 or AW-46

4" Ductile Iron Twin Motor Pump Curve

Pumping Applications

The FF-4D-TM is designed for pumping slurry solids and abrasive solids. The applications below represent only some of what this pump can do. Call our expert sales technicians at (228) 475-2468 for more information or help with finding the perfect pump for your needs.

Oil Rig, Well Cellar pumping

Reserve pit pumping

Clarifier pumping

Pit slurry pumping

Petroleum tank cleaning

Sewage solids pumping

Heavy solids pumping

Disaster response

Oil Well blowout cleanup

Drill Mud preparation

Directional Drilling

Oil Spill Response

Barge cleaning operations

Heavy crude pumping

Paraffin crude pumping

Refinery tank cleanouts

Agriculture pond aeration

Vacuum truck assist

Fly Ash Pumping

Construction dewatering

Floodwater abatement

Utility Break locations

Vessel dewatering

Industrial waste pumping

Fast Flow Pumps • 9700 Hwy 63 • Moss Point MS 39562

© Copyright 2020 Fast Flow All Rights Reserved

Phone: 228.475.2468

Fast Flow, LLC and Fast Flow Pumps manufactured pumps are protected under: 35 U.S.C., 37 C.F.R. and 18 U.S.C.  Fast Flow, LLC and Fast Flow manufactured pumps are covered by one or more of the following patents: United States Patent Number(s): 6,942,448; 7,442,003; 8,152,443; 10,138,891 Other Patents Pending, Domestic and Foreign

  • Facebook