Mining Pumping

Fast Flow Mining Highlights


MSHA no problem

Explosion Proof

No electricity required

Work up to the mine face

26 lb pumps move up to 600 GPM

Easily handles coal fines & heavy mud

Can be powered by existing hydraulics

Simple to use and maintain

A Fast Flow 3" pump weighs 80% less and can pump 2.5 times the water of an electric submersible pump

No MHSA Certification needed here!

“The type of pump you describe does not fall into a category of equipment that MSHA approves. In addition, there is not a regulation that would require a hydraulic powered pump to be MSHA approved.”

Kenneth Porter - Department of Labor

Recently, Fast Flow Pumps participated in a coal mine reliability test and outperformed electric submersible pumps in the key fields of safety and reliability. 

The Fast Flow pumps were immune to the electrical deterioration effects that plagued the other submersibles, including burnt electrical heads, damaged electrical windings and cable wiring failure. More importantly, Fast Flow hydraulic submersible pumps completely eliminate the danger of running the three phase electric service to electric submersibles, and eliminates standing in several inches of water with 480 volts nearby. Fast Flow pumps have other advantages in the mines, including portability, self-priming design, and the ability to handle coal fines without clogging.  Fast Flow pumps performed favorably when attached to the auxiliary hydraulics of a mine pinner, and can be run from several other equipment types. 

Fast Flow Pumps • 9700 Hwy 63 • Moss Point MS 39562

© Copyright 2020 Fast Flow All Rights Reserved

Phone: 228.475.2468

Fast Flow, LLC and Fast Flow Pumps manufactured pumps are protected under: 35 U.S.C., 37 C.F.R. and 18 U.S.C.  Fast Flow, LLC and Fast Flow manufactured pumps are covered by one or more of the following patents: United States Patent Number(s): 6,942,448; 7,442,003; 8,152,443; 10,138,891 Other Patents Pending, Domestic and Foreign