Tank Cleaning Pumping

Fast Flow pumps have a compact footprint and can fit into a hatchway. A 3” Fast Flow pump weighs less than 45 lbs and can be easily maneuvered by a single person 

A barge loaded with paraffin crude pumped by a 3” Fast Flow Pump

Top Reasons to have a Fast Flow Pump on your tank cleaning project

•45 lb pump fits in a hatchway and is easily maneuverable

•Can pump sludge, paraffin, cold crude, diesel and jet fuel

•Actual size of a 3” pump (pictured below) is 21” x 10” x 11”

•Can pump heavy oilfield waste & slurries to 22 lbs per gallon

•3” Pump flows up to 550 GPM and up to 300’ vertically

•There are no mechanical seals & no wear plates to replace

•Can ship "next day air" by parcel carriers

•Replaces an arsenal of air diaphragm pumps

•Field serviceable in under an hour by the average technichian.

•Bottom suction pump can pump down to 1" of fluid/material

•This pump has no internal bearings and can run dry all day.

Large Diameter Tank Cleaning

Fast Flow pumps can process the most demanding petrochemical tasks. The 110,000-barrel crude oil tank at Grand Isle Louisiana had accumulated 16 feet of heavy paraffin crude oil sludge and heavy solids that were part of the stock over the years of operation. A single Fast Flow 3” pump was able to move the sludge over 800 feet in a single 3”  hose from shore to a waiting barge. The 3” pumped the paraffin crude solids, then pumped and shot a full 6’ stream out into the barge. Fast Flow pumps helped to complete the task 2 full weeks ahead of schedule, pumping paraffin solids 865' to a barge.

Fast Flow Pumps • 9700 Hwy 63 • Moss Point MS 39562

© Copyright 2016 Fast Flow All Rights Reserved

Phone: 228.475.2468
 

Fast Flow, LLC and Fast Flow Pumps manufactured pumps are protected under: 35 U.S.C., 37 C.F.R. and 18 U.S.C.  Fast Flow, LLC and Fast Flow manufactured pumps are covered by one or more of the following patents: United States Patent Number(s): 6,942,448; 7,442,003; 8,152,443; 10,138,891 Other Patents Pending, Domestic and Foreign